 | Deck support is provided by a minimum 6 I-Beams welded at
dynamic impact points. Continuous single-piece headboard increases
strength across the front of the deck. |
| Lip hinge is a full width design to maximize strength and to
withstand the dynamic forces. Minimum of 7 rear hinge support
blocks plus two corner mounted tilt pockets for a total of 9 rear
hinge supports. |
| Blue Giant's unique 4" tilt design accommodates uneven
loads. This floating action accepts and spreads stresses so that
the deck does not twist under load and cause weld breakage.
Prevents damage to forks, tires, steering system, load and
prolongs life of the dock leveler. |
| Working load range 12" (305mm) above and 12" (305mm)
below deck level. |
| Swing-out maintenance personnel safety strut is standard on all
models. |
| Full range toe guards are heavy gauge steel plate and come
standard in ANSI approved safety yellow. |
| High visibility safety striping alerts personnel when Dock
Leveler is in the extended position above cross traffic. |
| Standard mechanical night locks (2) and stops (2). |
| Standard molded rubber bumpers (2). |
