Rolling Steel Doors

Rolling Steel Garage Doors

We’re Not Just the Right choice. We’re the Best Choice.

New Jersey Door Works’ has a long history of excellence in the design, construction and installation of doors that have met and often exceeded the needs and expectations of even the most critical projects.

With numerous innovations created and experience acquired over the years, New Jersey Door Works continues to lead all other door dealers with both standard and custom-made doors from a variety of materials and colors to meet almost any need.

New Jersey Door Works sells, services and installs all major (and most specialty) brands of rolling steel doors, including Wayne-Dalton, Cookson, Clopay, Overhead Door, and others.

Spotlight: Wayne Dalton Model 900

  • SIZES UP TO 16′ WIDE AND 16′ HIGH
  • MAX STEEL GAUGE = 20
  • 2″ FLAT AND CURVED PROFILE SLATS
  • DURABLE & ECONOMICAL

Rolling Steel Garage Doors

Reliable And Durable Rolling Service Doors For Moderate Use

The Wayne-Dalton 900 Series rolling service door is ideal for jobs where an economical solution for durability and strength is needed. The 900 Series offers flexibility in substrate materials with choices of 24, 22, or 20–gauge galvanized steel, stainless steel, or aluminum.

Color options range from our five standard factory-finish colors to a full range of 180 RAL powder coat choices.

Popular in both interior and exterior applications, the Wayne-Dalton 900 Series rolling service door features a galvanized, pre-painted curtain of minimum 24-gauge steel. All 900 series doors are standard wind load rated with a minimum of 20 PSF.

Materials & Construction

Wayne-Dalton’s 900 Series rolling doors are composed of curved or flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 900 Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.

The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033″ per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper countebalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsional load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbal ance mechanism. Slat hoods are available in blue, brown, beige, and white doors.

Spotlight: Wayne Dalton Model 800 (Insulated)

  • SIZES UP TO 42′ WIDE AND 40′ HIGH
  • INSULATION R-VALUE = 6.7
  • MAX STEEL GAUGE = 18
  • WINDLOAD UP TO 55 PSF
  • FLAT 3″ SLATS

Rolling Steel Garage Doors

Insulated Rolling Doors Cut Your Total Energy Cost

The Wayne-Dalton 800C Series rolling service door is designed to meet the tough requirements of virtually any commercial or industrial application with the added advantage of energy efficiency. The 800C Series offers flexibility in substrate materials with choices of galvanized or prime steel, stainless steel, or aluminum.

Color options range from our standard five factory finish colors to a full range of 180 RAL powder coat choices. Polyurethane insulation in each slat promotes energy savings and building comfort.

Popular in both interior and exterior applications, the Wayne-Dalton 800C Series insulated rolling service door features a galvanized, pre-painted curtain of minimum 22-gauge steel. 800C Series doors are wind load rated at 20 PSF. An optional wind load rating of up to 55 PSF is available to cover your Florida and Dade County windload requirements.

Materials & Construction

Wayne-Dalton’s 800C Series rolling doors are composed of flat slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 800C Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal, and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.

Counterbalance assembly consists of a spring barrel which serves as load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033″ per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper counterbalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsion load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbalance mechanism. Slat hoods are available on blue, brown, beige, and white doors.

Spotlight: Wayne Dalton Model 700 Rolling Steel Fire Door

  • SIZES UP TO 24′ WIDE AND 24′ HIGH
  • EASY TO TEST WITH STANDARD AUTO-RESET
  • QUIET OPERATION
  • UL / FM RATED
  • CONFORMS TO NFPA STANDARD 80
    (National Fire Protection Association)

Rolling Steel Garage Doors

The Industry’s Most Innovative Fire Door

Wayne-Dalton FireStar™ Rolling Steel Fire Doors provide a practical and innovative solution to safety and fire protection. FireStar doors can be drop-tested and reset at any time by anyone, such as a facility manager or maintenance supervisor, thanks to a standard auto-reset feature.

The FireStar door features a forward-thinking design that outperforms industry standard fire doors in all areas, including auto-reset testing capability; smooth, quiet operation; and reliable, long-lasting performance.

FireStar rolling steel fire doors are a simple and innovative solution for your safety and fire protection needs. Critical elements necessary in the reliable function of fire doors are incorporated as standard features with FireStar’s revolutionary design.

Safety

The FireStar door can be drop tested easily and reset in a matter of seconds at any time; no tools or service technicians are required. Please note that this can be done in addition to the door’s required annual inspection by a trained door systems technician. By self-testing throughout the year, facility personnel can be even more confident that their door will function safely in the event of fire.

The drop-out mechanism is designed to eliminate down time during drop testing while the viscous governor technology results in smoother, quieter door operation.

Reliability

FireStar’s revolutionary design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance.

Factory tested and approved for a minimum of 20,000 cycles, the FireStar door can be used and tested on a regular basis without concerns of premature failure.

FireStar fire doors have been tested and approved to meet the requirements of well known agencies, such as Underwriters Laboratories and Factory Mutual, and conform to NFPA Standard 80.

Simplicity

Wayne-Dalton incorporates one standardized component design for all FireStar doors regardless of size, and utilizes fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of potential service calls in the future. And as an added benefit, eliminating one of the fusible link cables helps the door and surrounding area look cleaner and less cluttered. It also reduces the risk of cable interference with other nearby fixtures.

Features

  • Easy testing and auto-reset
  • Innovative planetary gear design approved and tested for a minimum of 20,000 cycles
  • Preassembled drop-out mechanism
  • Viscous governor technology
  • Single fusible link cable routing
  • Standardized component design for all door sizes
  • Chain hoist or motor operated
  • Available with left-hand or right-hand operation
  • UL / FM approved

CONTACT NEW JERSEY DOOR WORKS FOR MORE BRANDS, MODELS + OPTIONS

NAVIGATION